Hozelock Stakes, Clips & Risers
The parts that hold a Hozelock micro irrigation system in place: stakes and clamps for the 13mm supply tube, and stakes, clips and extension tubes for 4mm micro tube and jets. They're all made for Hozelock's own tube and jets.
For 13mm supply tube
- 2770 supply tube stakes: pin the tube to the ground. Hozelock recommends one stake per metre.
- 7034 ratchet clamps: tighten the tube onto barbed fittings, so joints stay put under pressure.
For 4mm micro tube and jets
- 2781 micro tube stakes: hold micro tube in pots, baskets, raised beds and greenhouses.
- 7029 micro support stakes: hold micro jets and sprayers steady above the plants.
- 7030 extension tubes: lift a jet or dripper up to 24cm higher, so the spray clears the plants around it.
- 2782 wall clips: run micro tube neatly up walls, along fences and round door frames.
Do I need extension tubes?
Only if the plants grow tall enough to block the spray. Fit them in spring, or add them later in the season as the plants grow.
See all our Hozelock irrigation fittings, or our stakes and clips for other brands. For help, read our guide to 4mm micro tube, or call us on 0333 335 6295.
We Offer Everything to Water Your Garden
We have a vast selection of Kits, Timers, Hose Fittings, drippers and Sprinklers.
