{"title":"Drip Line Fittings","description":"\u003cp\u003ePalaplast fittings for 16mm drip line and LDPE pipe, including 16\/17mm drip line. Each one uses Palaplast's Lock fitting: tighten the nut by hand and a grip ring holds the pipe. They're rated to 6 bar and made in Greece.\u003c\/p\u003e\n\n\u003ch2\u003eWhich fitting do you need?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoin two lengths or repair a cut:\u003c\/strong\u003e \u003ca href=\"\/products\/palaplast-drip-line-joiner-for-16-17mm-pipe\"\u003estraight joiner (3261\/1616)\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurn a corner:\u003c\/strong\u003e \u003ca href=\"\/products\/palaplast-drip-line-elbow-for-16-17mm-pipe\"\u003e90° elbow (3300\/1616)\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBranch off a second run:\u003c\/strong\u003e \u003ca href=\"\/products\/palaplast-drip-line-tee-connector-for-16-17mm-pipe\"\u003eequal tee (3291\/1616)\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnect to a thread:\u003c\/strong\u003e the \u003ca href=\"\/products\/palaplast-drip-line-threaded-male-connector-3-4-for-16-17mm-pipe\"\u003e3\/4\" male connector (3251\/0162)\u003c\/a\u003e screws into a female fitting such as a valve or filter. The \u003ca href=\"\/products\/palaplast-drip-line-threaded-female-connector-3-4-for-16-17mm-pipe\"\u003e3\/4\" female connector (3250\/0162)\u003c\/a\u003e screws onto a male thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClose the end:\u003c\/strong\u003e \u003ca href=\"\/products\/drip-line-stop-end-for-16-17mm-pipe\"\u003estop end (3271\/0016)\u003c\/a\u003e. Undo it to flush grit from the line.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need tools?\u003c\/h3\u003e\n\u003cp\u003eNo. Cut the pipe square, push it through the nut and grip ring, and tighten the nut by hand. Use PTFE tape on threaded joints.\u003c\/p\u003e\n\u003cp\u003eNeed drip line to go with them? See our \u003ca href=\"\/collections\/drip-line\"\u003edrip line\u003c\/a\u003e range, or call us on 0333 335 6295.\u003c\/p\u003e","products":[{"product_id":"drip-line-stop-end-for-16-17mm-pipe","title":"Palaplast 16\/17mm Drip Line Stop End (3271\/0016)","description":"\u003cp\u003eClose off the end of a 16mm drip line or LDPE pipe. Push the pipe in and tighten the nut by hand for a watertight seal, then undo it any time to flush grit out of the line.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePalaplast code:\u003c\/strong\u003e 3271\/0016.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e stop end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe:\u003c\/strong\u003e 16mm drip line and LDPE pipe, including 16\/17mm drip line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Palaplast Lock fitting: a nut and grip ring hold the pipe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e rated to 6 bar (6 ATM).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Greece.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cp\u003eCut the pipe square. Loosen the nut, push the pipe fully into the fitting through the nut and grip ring, then tighten the nut by hand. No tools or clips needed. Undo the nut to change your layout. To flush the line, undo the stop end with the water on for a few seconds, then refit it.\u003c\/p\u003e\n\u003ch3\u003eUse it with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/rainbird-drip-line-long-run-dripper-pipe-50m\"\u003eRain Bird 50m drip line\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eOther Palaplast fittings: \u003ca href=\"\/products\/palaplast-drip-line-joiner-for-16-17mm-pipe\"\u003ejoiner\u003c\/a\u003e, \u003ca href=\"\/products\/palaplast-drip-line-tee-connector-for-16-17mm-pipe\"\u003etee\u003c\/a\u003e, \u003ca href=\"\/products\/palaplast-drip-line-elbow-for-16-17mm-pipe\"\u003eelbow\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palaplast","offers":[{"title":"Default Title","offer_id":54983772373334,"sku":"DL-PA-Stop","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0928\/5009\/4422\/files\/drip-line-stop.webp?v=1787357725"},{"product_id":"palaplast-drip-line-joiner-for-16-17mm-pipe","title":"Palaplast 16\/17mm Drip Line Joiner (3261\/1616)","description":"\u003cp\u003eConnect two lengths of 16mm drip line or LDPE pipe, to extend a run or repair a damaged section. The nuts tighten by hand for a watertight seal.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePalaplast code:\u003c\/strong\u003e 3261\/1616.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e straight joiner, 16 x 16mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe:\u003c\/strong\u003e 16mm drip line and LDPE pipe, including 16\/17mm drip line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Palaplast Lock fitting: a nut and grip ring hold the pipe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e rated to 6 bar (6 ATM).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Greece.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cp\u003eTo repair a cut, trim out the damaged section so both ends are square. Loosen the nut, push the pipe fully into the fitting through the nut and grip ring, then tighten the nut by hand. No tools or clips needed. Undo the nut to change your layout.\u003c\/p\u003e\n\u003ch3\u003eUse it with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/rainbird-drip-line-long-run-dripper-pipe-50m\"\u003eRain Bird 50m drip line\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eOther Palaplast fittings: \u003ca href=\"\/products\/palaplast-drip-line-elbow-for-16-17mm-pipe\"\u003eelbow\u003c\/a\u003e, \u003ca href=\"\/products\/palaplast-drip-line-tee-connector-for-16-17mm-pipe\"\u003etee\u003c\/a\u003e, \u003ca href=\"\/products\/drip-line-stop-end-for-16-17mm-pipe\"\u003estop end\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palaplast","offers":[{"title":"Default Title","offer_id":54983831454038,"sku":"DL-PA-Joiner","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0928\/5009\/4422\/files\/drip-line-joiner.webp?v=1787358397"},{"product_id":"palaplast-drip-line-elbow-for-16-17mm-pipe","title":"Palaplast 16\/17mm Drip Line Elbow (3300\/1616)","description":"\u003cp\u003eTake 16mm drip line or LDPE pipe round a 90° corner, at the end of a bed or round a raised bed. The nuts tighten by hand for a watertight seal.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePalaplast code:\u003c\/strong\u003e 3300\/1616.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 90° elbow, 16 x 16mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe:\u003c\/strong\u003e 16mm drip line and LDPE pipe, including 16\/17mm drip line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Palaplast Lock fitting: a nut and grip ring hold the pipe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e rated to 6 bar (6 ATM).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Greece.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cp\u003eCut the pipe square. Loosen the nut, push the pipe fully into the fitting through the nut and grip ring, then tighten the nut by hand. No tools or clips needed. Undo the nut to change your layout.\u003c\/p\u003e\n\u003ch3\u003eUse it with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/rainbird-drip-line-long-run-dripper-pipe-50m\"\u003eRain Bird 50m drip line\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eOther Palaplast fittings: \u003ca href=\"\/products\/palaplast-drip-line-joiner-for-16-17mm-pipe\"\u003ejoiner\u003c\/a\u003e, \u003ca href=\"\/products\/palaplast-drip-line-tee-connector-for-16-17mm-pipe\"\u003etee\u003c\/a\u003e, \u003ca href=\"\/products\/drip-line-stop-end-for-16-17mm-pipe\"\u003estop end\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palaplast","offers":[{"title":"Default Title","offer_id":54984337031510,"sku":"DL-PA-Elbow","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0928\/5009\/4422\/files\/drip-line-elbow.webp?v=1787365951"},{"product_id":"palaplast-drip-line-threaded-male-connector-3-4-for-16-17mm-pipe","title":"Palaplast 16\/17mm Drip Line Connector – 3\/4\" Male Thread (3251\/0162)","description":"\u003cp\u003eJoin 16mm drip line or LDPE pipe to any fitting with a 3\/4\" female thread, such as a tap connector, filter or valve. The nut tightens by hand for a watertight seal.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePalaplast code:\u003c\/strong\u003e 3251\/0162.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnects:\u003c\/strong\u003e 16mm pipe to a 3\/4\" male thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe:\u003c\/strong\u003e 16mm drip line and LDPE pipe, including 16\/17mm drip line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Palaplast Lock fitting: a nut and grip ring hold the pipe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e rated to 6 bar (6 ATM).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Greece.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cp\u003eWrap the thread with PTFE tape and screw it into the female fitting. Cut the pipe square. Loosen the nut, push the pipe fully into the fitting through the nut and grip ring, then tighten the nut by hand. No tools or clips needed. Undo the nut to change your layout.\u003c\/p\u003e\n\u003ch3\u003eUse it with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/palaplast-drip-line-threaded-female-connector-3-4-for-16-17mm-pipe\"\u003e3\/4\" female connector\u003c\/a\u003e, for a male thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/rainbird-drip-line-long-run-dripper-pipe-50m\"\u003eRain Bird 50m drip line\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eOther Palaplast fittings: \u003ca href=\"\/products\/palaplast-drip-line-joiner-for-16-17mm-pipe\"\u003ejoiner\u003c\/a\u003e, \u003ca href=\"\/products\/palaplast-drip-line-tee-connector-for-16-17mm-pipe\"\u003etee\u003c\/a\u003e, \u003ca href=\"\/products\/palaplast-drip-line-elbow-for-16-17mm-pipe\"\u003eelbow\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palaplast","offers":[{"title":"Default Title","offer_id":54984387789142,"sku":"DL-PA-Male-3\/4","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0928\/5009\/4422\/files\/drip-line-threaded-male.webp?v=1787366138"},{"product_id":"palaplast-drip-line-threaded-female-connector-3-4-for-16-17mm-pipe","title":"Palaplast 16\/17mm Drip Line Connector – 3\/4\" Female Thread (3250\/0162)","description":"\u003cp\u003eJoin 16mm drip line or LDPE pipe to any fitting with a 3\/4\" male thread, such as a tap adapter, filter or solenoid valve outlet. The nut tightens by hand for a watertight seal.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePalaplast code:\u003c\/strong\u003e 3250\/0162.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnects:\u003c\/strong\u003e 16mm pipe to a 3\/4\" female thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe:\u003c\/strong\u003e 16mm drip line and LDPE pipe, including 16\/17mm drip line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Palaplast Lock fitting: a nut and grip ring hold the pipe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e rated to 6 bar (6 ATM).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Greece.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cp\u003eWrap the male thread with PTFE tape and screw the connector onto it. Cut the pipe square. Loosen the nut, push the pipe fully into the fitting through the nut and grip ring, then tighten the nut by hand. No tools or clips needed. Undo the nut to change your layout.\u003c\/p\u003e\n\u003ch3\u003eUse it with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/palaplast-drip-line-threaded-male-connector-3-4-for-16-17mm-pipe\"\u003e3\/4\" male connector\u003c\/a\u003e, for a female thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/rainbird-drip-line-long-run-dripper-pipe-50m\"\u003eRain Bird 50m drip line\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eOther Palaplast fittings: \u003ca href=\"\/products\/palaplast-drip-line-joiner-for-16-17mm-pipe\"\u003ejoiner\u003c\/a\u003e, \u003ca href=\"\/products\/palaplast-drip-line-tee-connector-for-16-17mm-pipe\"\u003etee\u003c\/a\u003e, \u003ca href=\"\/products\/palaplast-drip-line-elbow-for-16-17mm-pipe\"\u003eelbow\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palaplast","offers":[{"title":"Default Title","offer_id":54984438022486,"sku":"DL-PA-Female-3\/4","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0928\/5009\/4422\/files\/drip-line-threaded-female.webp?v=1787366402"},{"product_id":"palaplast-drip-line-tee-connector-for-16-17mm-pipe","title":"Palaplast 16\/17mm Drip Line Tee (3291\/1616)","description":"\u003cp\u003eJoin three lengths of 16mm drip line or LDPE pipe, so you can branch a second run off your main line. The nuts tighten by hand for a watertight seal.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePalaplast code:\u003c\/strong\u003e 3291\/1616.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e equal tee, 16 x 16 x 16mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe:\u003c\/strong\u003e 16mm drip line and LDPE pipe, including 16\/17mm drip line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Palaplast Lock fitting: a nut and grip ring hold the pipe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure:\u003c\/strong\u003e rated to 6 bar (6 ATM).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Greece.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cp\u003eCut the pipe square. Loosen the nut, push the pipe fully into the fitting through the nut and grip ring, then tighten the nut by hand. No tools or clips needed. Undo the nut to change your layout.\u003c\/p\u003e\n\u003ch3\u003eUse it with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/rainbird-drip-line-long-run-dripper-pipe-50m\"\u003eRain Bird 50m drip line\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eOther Palaplast fittings: \u003ca href=\"\/products\/palaplast-drip-line-joiner-for-16-17mm-pipe\"\u003ejoiner\u003c\/a\u003e, \u003ca href=\"\/products\/palaplast-drip-line-elbow-for-16-17mm-pipe\"\u003eelbow\u003c\/a\u003e, \u003ca href=\"\/products\/drip-line-stop-end-for-16-17mm-pipe\"\u003estop end\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palaplast","offers":[{"title":"Default Title","offer_id":54984457552214,"sku":"DL-PA-Tee","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0928\/5009\/4422\/files\/drip-line-tee.webp?v=1787366408"},{"product_id":"claber-automatic-drain-valve-90910","title":"Claber Automatic Drain Valve 3\/4\" for Underground Systems – 90910","description":"\u003cp\u003e\u003cstrong\u003eWhat it is\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Claber 90910 is an automatic drain valve for underground irrigation systems, such as pop-up sprinkler zones. After each watering it lets the water drain out of the buried pipe, so there's no water left inside to freeze and crack the pipe or fittings in winter. It's part of Claber's Rain Jet range for underground systems.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow it works\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFit the valve at the lowest point of the buried pipe, pointing downwards, ideally into a small pocket of gravel so the water can soak away. While the system is running, the water pressure keeps the valve closed and watertight. When the zone switches off and the pressure drops, the valve opens and the pipe drains automatically.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy it works well\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt drains the system automatically, so there's nothing to remember before the first frost.\u003c\/li\u003e\n\u003cli\u003eIt stays watertight while the system is watering.\u003c\/li\u003e\n\u003cli\u003eThe metal parts are bronze, so it won't corrode underground.\u003c\/li\u003e\n\u003cli\u003eIt's supplied with a 3\/4\" adaptor, so it suits both 1\/2\" and 3\/4\" fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e automatic draining of underground irrigation pipes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e 1\/2\" (15–21mm) male thread, with a 3\/4\" (20–27mm) adaptor supplied.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterials:\u003c\/strong\u003e bronze metal parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 1 valve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClaber code:\u003c\/strong\u003e 90910.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eUse it with\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/claber-pop-up-sprinklers\"\u003eClaber pop-up sprinklers\u003c\/a\u003e and Colibri lawn kits.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/solenoid-valves-manifolds\"\u003eSolenoid valves and manifolds\u003c\/a\u003e for multi-zone lawn systems.\u003c\/li\u003e\n\u003cli\u003eOur \u003ca href=\"\/pages\/lawn-popup-sprinkler-design\"\u003elawn pop-up sprinkler designer\u003c\/a\u003e to plan your system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAs an Authorised Claber Stockist, we hold Claber spare parts and we're happy to help you plan your system. Call us on 0333 335 6295.\u003c\/p\u003e","brand":"Claber","offers":[{"title":"Default Title","offer_id":56476197749078,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0928\/5009\/4422\/files\/90910.webp?v=1793816333"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0928\/5009\/4422\/collections\/drip-line-tee-4314366_64d534da-21df-47f7-8dcf-8b45a23427ec.webp?v=1787153189","url":"https:\/\/www.gardenwatering.co.uk\/collections\/drip-line-irrigation-fittings.oembed?type=grid","provider":"Garden Watering","version":"1.0","type":"link"}