Drip Line Fittings
Palaplast fittings for 16mm drip line and LDPE pipe, including 16/17mm drip line. Each one uses Palaplast's Lock fitting: tighten the nut by hand and a grip ring holds the pipe. They're rated to 6 bar and made in Greece.
Which fitting do you need?
- Join two lengths or repair a cut: straight joiner (3261/1616).
- Turn a corner: 90° elbow (3300/1616).
- Branch off a second run: equal tee (3291/1616).
- Connect to a thread: the 3/4" male connector (3251/0162) screws into a female fitting such as a valve or filter. The 3/4" female connector (3250/0162) screws onto a male thread.
- Close the end: stop end (3271/0016). Undo it to flush grit from the line.
Frequently asked questions
Do I need tools?
No. Cut the pipe square, push it through the nut and grip ring, and tighten the nut by hand. Use PTFE tape on threaded joints.
Need drip line to go with them? See our drip line range, or call us on 0333 335 6295.
We Offer Everything to Water Your Garden
We have a vast selection of Kits, Timers, Hose Fittings, drippers and Sprinklers.
