Antelco

Authorised Antelco Stockist

Antelco is an Australian micro irrigation specialist, making drippers, micro sprays and fittings for water-efficient watering. As an Authorised Antelco Stockist, we carry the Antelco parts that make up the heart of a drip system, from the tap adapter to the last dripper.

Based inSouth Australia

OwnershipAustralian owned and operated

Specialises inMicro irrigation

We stockDrippers, sprays and fittings

About Antelco

Antelco is Australian owned and operated, and based in South Australia. It specialises in micro irrigation, making the drippers, micro sprays, sprinklers and fittings used in drip and micro systems by home gardeners, landscapers and growers around the world.

Antelco parts are made for precise, low-volume watering, and they fit standard 13mm supply pipe and 4mm micro tube, so they work alongside most drip systems.

What makes Antelco different

Pressure-compensating drippers, such as the Asta stake dripper in 2, 4 or 8 litres an hour, which give every plant the same amount of water.
Adjustable micro sprays, including the Hi-Jet stake with VariFlow microjet, so you can set the spray pattern and flow for each bed.
The parts that keep a system working, such as the 1.75 bar pressure reducer, 13mm in-line filter and on/off flow control valve.
A full range of 13mm and 4mm fittings, from the nut and tail tap adapter to tees, elbows, stakes and clips.

Guides and advice

Frequently asked questions

Do Antelco fittings fit other brands of pipe?

Antelco 13mm fittings suit standard 13mm (16mm outside) supply pipe, and the 4mm fittings suit 4mm micro tube.

What does pressure compensating mean?

A pressure-compensating dripper gives the same flow whatever the pressure in the pipe, so plants at the far end of a run get as much water as those near the tap.

Do I need a pressure reducer?

Yes, on mains pressure. Drippers and micro fittings are made for low pressure, and the Antelco 1.75 bar reducer stops fittings blowing off and drippers spraying.