Build Your Own Dripper Kit, 6 Easy Steps
Personalised Kit Builder
Build Your Perfect
Irrigation Kit
Answer up to six quick questions and we'll assemble the exact components you need โ nothing more, nothing less.
๐ง
1
Drippers
2
Main Pipe
3
Micro Hose
4
Pipe Ends
5
Timer
6
Rain Sensor
โ
Your Kit
Question 1 of 6
How many drippers do you need?
Each dripper delivers water directly to the base of a plant. Count your plants or planting positions.
Question 2 of 6
How long is your main supply run?
The 13mm main hose carries water from your tap along the length of your garden bed.
Question 3 of 6
How much micro hose do you need?
The 4mm micro hose connects each dripper back to the main supply line. More hose gives you greater reach between the pipe and each plant.
Question 4 of 6
How many open ends will your main pipe have?
Every open end of your main supply line needs an end-stop to prevent leaks. Where your line branches, a tee connector is added automatically.
Question 5 of 6
Would you like to automate your system?
A water timer connects between your outdoor tap and the system, turning watering on and off automatically so you never have to think about it.
Question 6 of 6
Would you like to add a rain sensor?
A rain sensor connects to your timer and automatically prevents watering if it has been raining, saving water and protecting your plants from overwatering.
โ ๏ธ
NOT SUITABLE FOR GREENHOUSES OR COVERED AREAS
A rain sensor must be mounted outdoors in an exposed position to detect rainfall accurately. It is not compatible with systems installed inside a greenhouse, polytunnel, conservatory or any covered growing area where it cannot receive rain.
Your Custom Kit
Everything you need, nothing you don't.
ย