Adaptors & Reducers
The threaded parts that join one size or type of fitting to another. When a valve, timer, tap or pipe fitting doesn't match the next part in your system, one of these usually solves it. They're common in larger systems with solenoid valves and manifolds.
Changing thread size
- Hansen equal nipple: joins two female threads of the same size, 1/2", 3/4" or 1".
- Hansen reducing nipple: joins two female threads of different sizes, 1" x 3/4" or 3/4" x 1/2".
- Hansen reducing bush: screws into a female thread to step it down a size.
All three are tapered BSPT threads, in glass-fibre reinforced nylon rated to 16 bar, with WRAS approval for drinking water.
Changing pipe size
The Claber 90328 reducing coupling joins 20mm polyethylene pipe to 16mm pipe, so you can run a larger main from the tap and smaller pipe out to the beds. For MDPE pipe, see our MDPE fittings and adaptors.
Pressure and sealing
- Antelco pressure reducer: brings mains pressure down to 1.75 bar for drippers and micro sprays.
- Silicone thread sealing washers: seal 1/2" and 3/4" threaded joints hand-tight, without PTFE tape.
BSP or BSPT?
Both are British pipe threads. BSPT is tapered and seals as it tightens, which is what the Hansen fittings use. Use thread sealant or PTFE tape on tapered joints.
For more help, read about solenoids and manifolds, or call us on 0333 335 6295.
We Offer Everything to Water Your Garden
We have a vast selection of Kits, Timers, Hose Fittings, drippers and Sprinklers.
