Irrigation Tools & Accessories
The tools and extras that make an irrigation system easier to install and keep running well: filters, hole punches, pressure reducers, sealing, clips, batteries and a fertiliser injector. Most of these fit any brand of 13mm and 4mm system.
Keeping the system working
- Antelco 13mm in-line filter: fit it near the start of the system. It traps grit and sand, the main cause of blocked drippers. The screen comes out for rinsing.
- Antelco pressure reducer: holds the system at 1.75 bar, so fittings stay on and drippers work as they should.
- Venturi fertiliser injector: uses the flow of water to draw liquid feed into the system, so every dripper delivers an even feed. It's ideal for greenhouses and raised beds.
Installing
- Antelco hole punch: makes a clean 4mm hole in 13mm or 19mm pipe for drippers, jets and tube adaptors, with a hex spanner built in.
- PTFE tape and silicone sealing washers: seal threaded joints at taps, timers and valves.
- Clips to keep pipe neat: 13mm saddle clips, nail-in wall clips, 4mm saddle clips, ratchet clips and Tidy Bow elbows. See all stakes and clips.
Timer batteries
Duracell Procell AA for Hozelock timers, and AAA for the Claber Hydro-4 BT and Elettra BT. Change them at the start of each season.
What order do the fittings go in at the tap?
Start at the tap, then add a tap splitter if you need one, then the timer, then the pressure reducer. The filter goes after the reducer, before the first dripper. Rinse it whenever the flow drops.
Using Hozelock? See Hozelock tools and accessories. For help, read about pressure reducers, or call us on 0333 335 6295.
We Offer Everything to Water Your Garden
We have a vast selection of Kits, Timers, Hose Fittings, drippers and Sprinklers.
