Hozelock Hose Connectors

These are Hozelock click-fit connectors for garden hose, taps, spray guns and sprinklers, not fittings for irrigation pipe. For Hozelock automatic watering systems (13mm supply tube and 4mm micro tube), see Hozelock irrigation fittings.

Every Hozelock hose connector and fitting we stock, from tap connectors and hose end connectors to AquaStop, repair connectors, joiners and multi-way tap splitters. They all use Hozelock's click-fit system. Any Hozelock hose connector clicks onto any Hozelock tap connector, spray gun, sprinkler or timer, and comes off again with a pull of the collar.

What you need to connect a hose

A basic setup has three parts:

• A tap connector screws or clamps onto your tap and gives it a click-fit end.
• A hose end connector goes on the tap end of the hose and clicks onto the tap connector.
• An AquaStop connector goes on the other end of the hose. Your spray gun, nozzle or sprinkler clicks into it, and the water stops as soon as you unclip it, so you can swap tools without going back to the tap.

If you're starting from scratch, the 2385 connector kit has all three, and the 2352 complete kit adds a nozzle.

Which tap connector fits your tap?

• Threaded outside tap: the 2175 fits 3/4" (26.5mm) taps and comes with a 1/2" (21mm) adaptor for older taps. Together they suit about 95% of outside taps. The 2041 Pro is the same fit in nickel-plated brass.
• Round tap with no thread: the 2176 clamps onto spouts 14–18mm across.
• Mixer tap or wider spout: the 2177 fits spouts 20–24mm across, and the 2274 multi tap adapter fits square, round and mixer taps up to 34mm wide.
• Kitchen or bathroom tap with an aerator: the 2304 indoor tap connector fits taps with a 22mm female head, so you can water from indoors if you have no outside tap.

To run more than one hose or a timer from the same tap, use a 2-way, 3-way Flowmax or 4-way tap connector, or browse all our tap splitters.

Standard, Plus, Soft Touch or Pro?

All Hozelock hose connectors here fit 12.5mm (1/2") and 15mm (5/8") hose, and they all click together.

• Standard (2166, 2185 AquaStop): the everyday choice.
• Soft Touch (2070, 2075 AquaStop): grip pads that are easier to hold with wet hands.
• Plus (2050, 2055 AquaStop): soft-touch grips and a flexible tail that stops the hose kinking at the connector.
• Pro (2030, 2035 AquaStop, 2043 repair, 2044 joiner): metal sleeves for heavy, frequent use.

Repairing or extending a hose

To mend a split hose, cut out the damaged section and join the two ends with a 2100 repair connector (or the metal 2043 Pro). To join two hoses that already have connectors on, click them onto a 2291 double male joiner. To split one hose into two, use the 2293 Y connector.

Frequently asked questions

Do Hozelock connectors fit other brands?

Hozelock's click-fit is the standard most UK brands follow, so Hozelock connectors work with most click-style guns, sprinklers and accessories from other brands.

Why is my connector dripping?

It's usually a worn O-ring. A pack of replacement O-rings fixes most drips in seconds, with no tools.

Can I connect a flat or spiral hose?

Yes. The 2170 adaptor screws onto the threaded end of most flat and spiral hoses and turns it into a Hozelock click connector.

For more help choosing, read Hozelock connectors explained or our tap connector guide. Still not sure which fits your tap? Call us on 0333 335 6295.