Irrigation Fittings & Adapters

These are fittings for irrigation pipe (13mm supply pipe and 4mm micro tube), not garden hose fittings. They won't fit a garden hose or click onto hose connectors. Looking for fittings for your hose? See our garden hose fittings.

The connectors that hold a drip or micro irrigation system together: tap connectors, joiners, tees, elbows, crosses, end stops, take-offs and flow valves for 13mm supply pipe and 4mm micro tube. Most fittings come in two types, so the first choice is how you want them to grip the pipe.

Anti-leak compression or barbed push-fit?

• Anti-leak fittings have a nut that clamps the pipe onto the barb, so they won't blow off under pressure or pull apart when the pipe is tugged. Use them at the tap, where pressure is highest, and anywhere a joint is buried or hard to reach. See our anti-leak range, or start with the 16-piece kit.
• Antelco barbed fittings push into the pipe. They're quick to fit and good value for long layouts. Antelco rates them to 3 bar, so use a pressure reducer on mains pressure, and ratchet clips on joints you want extra secure.

Fittings for 13mm supply pipe

• At the tap: the anti-leak tap/timer connector, or the Antelco click tap adapter if you want to unclip the irrigation and use the tap for a hose.
• Join, turn and branch: anti-leak joiner, elbow and tee, or Antelco joiner, elbow, tee and 4-way cross.
• Control the flow: the anti-leak flow control or Antelco on/off valve.
• Close the end: see our end plugs and stop ends.
• Keep it clean: the Antelco in-line filter traps grit before it blocks your drippers.

Fittings for 4mm micro tube

Joiners, tees, elbows, crosses and stop ends for micro tube, plus take-offs from 13mm pipe. See all our 4mm micro tube fittings.

Do these fit Hozelock and Claber pipe?

Yes. They fit 13mm pipe with a 16mm outside diameter, including Hozelock, Claber and Rain Bird 13mm pipe.

For more help, read Hozelock vs universal irrigation fittings or our guide to pressure reducers, or call us on 0333 335 6295.